Next, go to 'Display' under the Functions menu again and it will now display all 10 channels and their corresponding input values.įinal step is creating new model profiles and binding to your receivers again, as in most cases any previous model setups will be lost.Flysky cables and when i have the following simulator. When finished, hold the Cancel button to save and exit. Set channels 5 through 10 to your personal preferences. Notice now that the Tx shows a total of 10 channels! You will need to reassign the switches and pots by going to 'AUX Channels'. On the Tx, enter the Functions menu by holding the OK button. The firmware update is now complete.Īssigning Switches: Four More Channels Of Awesome! Click Close Port and disconnect the Data cable.

The transmitter will automatically reboot when finished. Simply click 'Program' and watch the green progress bar slide over to 100 percent. Once connected the current firmware will be displayed.

Now on the Programmer application, double check that the correct COM port is selected in the upper left corner, and click 'Open Port'. It will ask if you are sure about entering the Firmware Update Mode, press OK, then select yes and press OK again to enter Update Mode. Press the down button until you see Firmware Update on the second page and press OK. Now, while holding both sticks at full down and left, power on the transmitter. (may need to 'Run As Administrator')įirmware Update Mode: Plug It In, Plug It InĬonnect the FS-i6 data cable to the back of the transmitters trainer port and plug in the USB. Pay attention to what COM port is populated when connecting the Tx, you will need this shortly. Once downloaded, go ahead and open the programmer application. exe file and then click 'View Raw' to initiate the dialogue box and start the download. (V1.5 is most recent as of 2018) Select the. Visit Github and download the latest programmer HERE. My Banggood Link, or it can be easily found on Amazon, Ebay ect for about $4-6usd with a quick search.įirst Things First: Thank You benb0jangles! FS-i6 transmitter (Flysky, Turnigy, Eachine, no matter the branding) This upgrade will unlock the ability to use ALL of the i6 transmitters switches and pots (potentiometers/knobs) and works with all branding variations Flysky, Eachine, Turnigy ect. (as far as I know)Ĭan't beat a 10ch radio for around $50 usd! Right?ġ. In this tutorial I wish show you how to easily upgrade the popular Flysky FS-i6 Tx (transmitter) from 6 channels to a 10ch radio with a quick firmware update.

Flysky fs i6 simulator download